✉ josie@itisjosie.com 📍 Yorkshire, UK
A bright and airy sewing workspace with a flowing floral sundress on a dress form, soft natural light, warm cream and blush tones, calm creative atmosphere.

Sewing & Crafts, Made with Love

Indie pattern reviews, DIY garment projects, and sewing tips from Josephine's creative corner in Yorkshire.

Sewing a Lapped Zipper by Machine for a Clean Finish

A lapped zip is a zip that stays on the outside of the garment: the tape is stitched flat to the right side of the opening, with a neat line of topstitching running down beside the teeth. Nothing is folded into a seam allowance to hide it, so the pull sits proud where you can grab it. It's the version you'll meet on wrap skirts, cushion covers, pencil cases and the front of a handmade tote.

Hand-sewing the same zip works, but it's slow, and the topstitch line is exactly the part people notice when they turn a garment over. Machine-stitching gives you an even stitch length and a line that runs parallel to the edge, which is what makes a finish look deliberate rather than rescued.

I sew in Australia now, and the calendar catches anyone reading a British sewing blog in July. While Yorkshire basks in sunshine, we're deep in a Melbourne winter, with frost on the lawn in Ballarat and drizzle that never really stops in Hobart. Winter suits this project, because a lapped zip sings on the heavy cotton drill and linen I'd normally push back until the weather warmed up.

Before the machine goes on, gather the basics: the zip, matching thread, a fresh needle, a zipper foot, fusible interfacing if the fabric is thin, tailor's chalk, a stiletto, tweezers and a pressing cloth. Settle in for the arvo with a pot of tea, and remember that nothing here is a one-way door — a wonky topstitch can be unpicked and redone.

Why the lapped zip is worth the extra minutes

The visible zip is the point. On a plain A-line in cotton, the same pattern with a lapped zip looks like something from a proper shop, and on a bag or cushion the zip becomes the feature rather than a functional afterthought. Several Love Notions patterns I've made include an exposed or lapped zip front, and it's the construction note I always flag in my pattern reviews — whether the designer asked you to topstitch the tape flat or drafted a facing to lap over it.

The lap is what sets it apart from a plain exposed zip. A strip of the garment, or a facing piece, overlaps the tape edge and is topstitched in place, so you see one clean line of stitching, a slim channel of teeth and a folded edge. The tape is captured rather than floating, and the bulk sits inside the fold instead of spreading across the seam allowance.

Picking a zip that suits the fabric

Size follows fabric weight in the old-fashioned way. A No. 3 for silks and light cottons, a No. 5 for cotton drill and linen, a No. 8 or 10 for denim, bags and anything used hard. Prym zips are made down under and you can pick them up at Spotlight for a couple of dollars each, so experimenting is cheap, and an Etsy seller in Adelaide will post you a chunky metal slider with a leather pull if you want the statement version.

Length matters more than weight. The tape needs to run two or three centimetres beyond each end of the marked opening, because those ends get folded and stitched down flat. Measure the opening on the finished garment rather than the pattern piece, and add your seam allowance before committing. Then choose your thread: match it to the tape for a line that disappears, or go bold and make the stitching the decoration.

Lapped, concealed, exposed or fly

A concealed zip hides the teeth in a fold of facing, so only the pull shows. An exposed zip leaves the whole tape visible with nothing folded over it. A lapped zip sits between the two — the tape is there in full, but one edge is covered by the lap and secured with topstitching. A fly zip is the small hidden version used in tailored trouser fronts, tucked behind a fold with a guard.

Four options, side by side:

Zip style What shows on the outside Best suited to Extra steps
Lapped zip Teeth in a channel, one topstitch line along the lap Wrap skirts, pouches, cushions, bag fronts Lap strip or facing folded over the tape and topstitched
Concealed zip Only the pull and a narrow gap of teeth Dresses, jacket fronts, cushions Facing folded into the opening, pressed, closed up with a foot
Exposed zip The whole tape, topstitched down both sides Statement bags, bold fashion pieces Tape stitched straight to the right side, no fold
Fly zip A small covered zip in the waistband Tailored trousers and skirts Long fly facing, separate guard, hook at the waist

Whichever you pick, fit the zip with the teeth at the top of the opening and the slider at the top end. Most modern zips are made that way, and one fitted upside down simply won't close.

Setting the machine up for a straight topstitch

Set the stitch length to two and a half or three millimetres for the topstitch — long enough to see, short enough to look like tailoring. The attaching stitches along the tape can run a touch longer so they don't split when the garment is pulled on and off. Fit a zipper foot with the toe over the teeth, or use a walking foot if your machine won't take one; either way the foot holds the tape flat so the feed pulls zip and fabric at the same rate.

The needle is the other half of a clean finish. My notes on choosing the right needle cover the sizes, why a fresh needle stops the skipped stitches that wreck a topstitch, and why you swap to a stretch needle for anything with elastane in it. A worn needle is the number one cause of a line that looks fine for ten centimetres and then goes ragged.

Stitching the tape and the lap

Press and clip the opening corners first, then lay the zip with the teeth pointing into the opening and the top stop sitting on your marked line. Hold the tape with pins or a quick run of tack basting and stitch across the top of the tape into the facing edge — that bar of stitching secures the slider end and stops everything shifting as you work down. Stitch the tape to each edge of the opening with the right sides together at the seam allowance, then bring the garment out to the right side.

Now the topstitch. With the zipper foot on the teeth, sew down the tape keeping the line parallel to the edge and about three millimetres from the fold. It's a long, slightly boring run, and it's the whole reason for doing this by machine — while the machine chugged away, I had a pan of homemade cinnamon apple sauce on the stove, and the smell of cinnamon did more for my patience than any podcast. Fold the garment edge or facing strip over the raw tape edge and topstitch through both layers in one line, catch the bottom of the opening, backstitch at both ends and trim the threads close.

Pressing the corners and the ends flat

The bottom of the opening is where lapped zips usually go wrong. Turn the garment inside out at the corner, fold the tape ends up over the bottom edge so they don't poke out, and press them flat with the tape pushed away from the teeth. The top end gets the same treatment: if your zip has no top stop, add one with a bar tack or a couple of firm stitches across the tape.

Steam and a pressing cloth, then rub the fold with your fingers while it's still warm to set it. In subtropical Queensland the humidity fights every press you give it, so use a damp cloth and don't leave the zip under a stack of books overnight or it will bow out of its channel. Close and open the zip a few times once it's cool. If the slider snags, the fault is nearly always the pressing rather than the stitching, and a re-press fixes it in seconds.

Joining the seam and finishing the hem

With the zip set, join the seam: stitch up to the bottom of the opening with the regular foot, pivot on the marked line and carry on with the seam allowance as usual. Leave a gap between the zip and the seam that matches your hem or waistband allowance so the seam closes flat without a pucker.

If it's a skirt, the hem is the next decision, and I keep coming back to a band rather than a folded hem on anything with a zip in it, because the band takes the weight of the zip and stops the lining dragging the hem out of line. The method is the same one I use in sewing a hem band, and it works just as well on linen as on cotton. Check the waistband or facing pieces against the finished body before you attach the zip, give the whole garment a final press, clip your threads and hang it up. A lapped zip topstitched at a consistent three millimetres is one of those finishes that makes a homemade piece look properly made — and if the first attempt needs a redo, unpick the topstitch and go again.

Popular Pattern Reviews

Pattern Designer Type Highlight
Compose Robe (Kids) Love Notions Robe / Loungewear Sizes 2T–16, cosy & practical
Tempo Sundress Love Notions Sundress No closures, shirred back panel
Arlington Sweater Love Notions Sweater Cold-weather staple
Sybil Illusion Skirt Love Notions Skirt (knit) 7 variations, optional pockets
Camden Pinafore Nina Lee Patterns Pinafore dress Year-round layering piece
Ogden Cami (dress hack) True Bias Cami / Dress Versatile wardrobe builder
Burda 6829 Burda Dress Multi-sized, special-occasion

Stay in Touch

Subscribe to the newsletter for sewing inspiration, pattern tips, and project ideas delivered straight to your inbox.